E-Cue 304 G-Seat

The E-Cue 304 G-Seat has 4 moving elements; its seat bucket, its seat pan, and its back-pad moving in sway and surge. These elements are combined with a shoulder and lap belt tensioning system. All elements are driven by high response Brushless DC electric motors with built in ball screws. The cueing system is designed to provide motion cues in three translational axes. Moog FCS also offers to combine the Motion Cueing G-Seat with its G-Suit system.

The Moog FCS G-seat is a further development of the experience Moog FCS has gained in motion cueing. It features the same high fidelity controllers and user-friendly interface as the Moog FCS motion and control loading systems. Furthermore, it is all digital, interfaces to the Host via ethernet, and features clever algorithms to increase cueing fidelity.

Specification E-Cue model 304 G-Seat

DOF

Excursion Limits

Velocity

Acceleration

Cushion

± 25 mm

>65 mm/s

>600 mm/s2

Buffet

± 3 mm

>65 mm/s

>600 mm/s2

Backpad-Sway

± 12 mm

>85 mm/s

>1200 mm/s2

Backpad-Surge

± 10 mm

>30 mm/s

>400 mm/s2

Seat Height

± 25 mm + seat travel

>65 mm/s

>600 mm/s2

Force Capacity

Cueing Unit

Minimum Force

Cushion

> 1128 N

Backpad-Sway

> 130 N

Backpad-Surge

> 700 N

Seat Height

> 2800 N

G-suit Controller

Simulation Range

2g to 9g

Scale

0.6 to 0.9 p.s.i/g

Tolerance

± 4% per g

Supply pressure

60-70 p.s.i.

Power requirements

Power requirements

3 phase 400 VAC, 50/60 Hz

Continuous power consumption

3 KW

Electronics & Software

Motion control computer, for both G-seat and G-suit controller

Maintenance & diagnostics computer

G-seat cueing software

Ethernet UDP & TCP/IP host interface

Remote diagnostics (modem) capability

Facsimile seat designed & manufactured by EDM Limited, UK - http://www.edm.ltd.uk

See other Moog FCS' Standard Systems >> E-Cue 624-1800